- The bed’s back, foot, up – down, movements can be adjusted by motors, using the side control panel.
- The up down movement of the bed is supplied by back forward sliding movement the bearers
- The bed consists of 4 rails made of injection plastic all sides of bed.
- The bed head section movement; there is a system to avoid discomfort to the patient and prevent the collection.
- The 12° Trendelenburg movement can be manually done by means of a gas spring when needed. The degree of the Trendelenburg can be adjusted by the degree indicator located at the end of the foot side of the bed.
- The bed back side has no gaps at all. The patient does not swing when the CPR application are executed.
- The bed’s back side has manual CPR arms on the left and the right side as to allow it to return to the normal position in the emergencies.
- The bed back segments can be controlled manuelly.
- The casters adjustment pedal is located at the foot of the bed(Central Brake). The casters can be adjused by this pedal.
- There are revoling rubber dampers at each corner of the bed and can turn around 360°
- The IV poles can be hung at each corner of the bed. The IV poles’ holes are specially designed as to allow other tools, which help the patient to cling as to seat, to be mounted easily.
- Each bed is constructed with metal parts which are painted with an electrostatic powder coating(200°C).
- The frame and the foot side of the bed is cover by ABS plastic.
- The height of the chassis, the bottom of the bed fluoroscopy c – arm has been designed for the effective use of devices.
- The head and the foot side of the bed is made of injection PP – PE plastic. Meanwhile, the base panel can be easily mounted and dismounted when cleaned by means of locks located on the left and the right side of the bed.
- The head and the foot side of the bed have colored stickers as to prevent quick deformation. There is also a steel plate at the base of the bed..
Foot Cramp Support “15 cm“
Central Locking `HB03-PP`
X ray Apart